Modélisation des écoulements compressibles via les méthodes Lattice-Boltzmann (thèse 2018 - 2020)
Activités
LBM, Compressible, Hyperbolique.
Axes de recherche :
________________
Modélisation des écoulements multiphasiques réactifs (voir les détails sur la page dédiée)
Publications scientifiques au M2P2
2022
Gauthier Wissocq, Thomas Coratger, Gabriel Farag, Song Zhao, Pierre Boivin, et al.. Restoring the conservativity of characteristic-based segregated models: application to the hybrid lattice Boltzmann method. Physics of Fluids, American Institute of Physics, 2022, 34 (4), pp.046102. ⟨10.1063/5.0083377⟩. ⟨hal-03627520⟩ Plus de détails...
A general methodology is introduced to build conservative numerical models for fluid simulations based on segregated schemes, where mass, momentum and energy equations are solved by different methods. It is here especially designed for developing new numerical discretizations of the total energy equation, adapted to a thermal coupling with the lattice Boltzmann method (LBM). The proposed methodology is based on a linear equivalence with standard discretizations of the entropy equation, which, as a characteristic variable of the Euler system, allows efficiently decoupling the energy equation with the LBM. To this extent, any LBM scheme is equivalently written under a finite-volume formulation involving fluxes, which are further included in the total energy equation as numerical corrections. The viscous heat production is implicitly considered thanks to the knowledge of the LBM momentum flux. Three models are subsequently derived: a first-order upwind, a Lax-Wendroff and a third-order Godunov-type schemes. They are assessed on standard academic test cases: a Couette flow, entropy spot and vortex convections, a Sod shock tube, several two-dimensional Riemann problems and a shock-vortex interaction. Three key features are then exhibited: 1) the models are conservative by construction, recovering correct jump relations across shock waves, 2) the stability and accuracy of entropy modes can be explicitly controlled, 3) the low dissipation of the LBM for isentropic phenomena is preserved.
Gauthier Wissocq, Thomas Coratger, Gabriel Farag, Song Zhao, Pierre Boivin, et al.. Restoring the conservativity of characteristic-based segregated models: application to the hybrid lattice Boltzmann method. Physics of Fluids, American Institute of Physics, 2022, 34 (4), pp.046102. ⟨10.1063/5.0083377⟩. ⟨hal-03627520⟩
T. Coratger, G. Farag, S. Zhao, Pierre Boivin, P. Sagaut. Large-eddy lattice-Boltzmann modeling of transonic flows. Physics of Fluids, American Institute of Physics, 2021, 33 (11), pp.115112. ⟨10.1063/5.0064944⟩. ⟨hal-03424286⟩ Plus de détails...
T. Coratger, G. Farag, S. Zhao, Pierre Boivin, P. Sagaut. Large-eddy lattice-Boltzmann modeling of transonic flows. Physics of Fluids, American Institute of Physics, 2021, 33 (11), pp.115112. ⟨10.1063/5.0064944⟩. ⟨hal-03424286⟩
G. Farag, S. Zhao, G. Chiavassa, Pierre Boivin. Consistency study of Lattice-Boltzmann schemes macroscopic limit. Physics of Fluids, American Institute of Physics, 2021, 33 (3), pp.037101. ⟨10.1063/5.0039490⟩. ⟨hal-03160898⟩ Plus de détails...
Owing to the lack of consensus about the way Chapman-Enskog should be performed, a new Taylor-Expansion of Lattice-Boltzmann models is proposed. Contrarily to the Chapman-Enskog expansion, recalled in this manuscript, the method only assumes an su ciently small time step. Based on the Taylor expansion, the collision kernel is reinterpreted as a closure for the stress-tensor equation. Numerical coupling of Lattice-Boltzmann models with other numerical schemes, also encompassed by the method, are shown to create error terms whose scalings are more complex than those obtained via Chapman-Enskog. An athermal model and two compressible models are carefully analyzed through this new scope, casting a new light on each model's consistency with the Navier-Stokes equations.
G. Farag, S. Zhao, G. Chiavassa, Pierre Boivin. Consistency study of Lattice-Boltzmann schemes macroscopic limit. Physics of Fluids, American Institute of Physics, 2021, 33 (3), pp.037101. ⟨10.1063/5.0039490⟩. ⟨hal-03160898⟩
G. Farag, T. Coratger, G. Wissocq, S. Zhao, Pierre Boivin, et al.. A unified hybrid lattice-Boltzmann method for compressible flows: Bridging between pressure-based and density-based methods. Physics of Fluids, American Institute of Physics, 2021, 33 (8), pp.086101. ⟨10.1063/5.0057407⟩. ⟨hal-03324229⟩ Plus de détails...
A unified expression for high-speed compressible segregated consistent lattice Boltzmann methods, namely, pressure-based and improved density-based methods, is given. It is theoretically proved that in the absence of forcing terms, these approaches are strictly identical and can be recast in a unique form. An important result is that the difference with classical density-based methods lies in the addition of fourth-order term in the equilibrium function. It is also shown that forcing terms used to balance numerical errors in both original pressure-based and improved density-based methods can be written in a generalized way. A hybrid segregated efficient lattice-Boltzmann for compressible flow based on this unified model, equipped with a recursive regularization kernel, is proposed and successfully assessed on a wide set of test cases with and without shock waves.
G. Farag, T. Coratger, G. Wissocq, S. Zhao, Pierre Boivin, et al.. A unified hybrid lattice-Boltzmann method for compressible flows: Bridging between pressure-based and density-based methods. Physics of Fluids, American Institute of Physics, 2021, 33 (8), pp.086101. ⟨10.1063/5.0057407⟩. ⟨hal-03324229⟩
S. Zhao, G. Farag, Pierre Boivin, P. Sagaut. Toward fully conservative hybrid lattice Boltzmann methods for compressible flows. Physics of Fluids, American Institute of Physics, 2020, 32 (12), pp.126118. ⟨10.1063/5.0033245⟩. ⟨hal-03087980⟩ Plus de détails...
S. Zhao, G. Farag, Pierre Boivin, P. Sagaut. Toward fully conservative hybrid lattice Boltzmann methods for compressible flows. Physics of Fluids, American Institute of Physics, 2020, 32 (12), pp.126118. ⟨10.1063/5.0033245⟩. ⟨hal-03087980⟩
G. Farag, S. Zhao, T. Coratger, Pierre Boivin, G. Chiavassa, et al.. A pressure-based regularized lattice-Boltzmann method for the simulation of compressible flows. Physics of Fluids, American Institute of Physics, 2020, 32 (6), pp.066106. ⟨10.1063/5.0011839⟩. ⟨hal-02885427⟩ Plus de détails...
A new pressure-based Lattice-Boltzmann method (HRR-p) is proposed for the simulation of flows for Mach numbers ranging from 0 to 1.5. Compatible with nearest neighbor lattices (e.g. D3Q19), the model consists of a predictor step comparable to classical athermal Lattice-Boltzmann methods, appended with a fully local and explicit correction step for the pressure. Energy conservation-for which the Hermi-tian quadrature is not accurate enough on such lattice-is solved via a classical finite volume MUSCL-Hancock scheme based on the entropy equation. The Euler part of the model is then validated for the transport of three canonical modes (vortex, en-tropy, and acoustic propagation), while its diffusive/viscous properties are assessed via thermal Couette flow simulations. All results match the analytical solutions, with very limited dissipation. Lastly, the robustness of the method is tested in a one dimensional shock tube and a two-dimensional shock-vortex interaction.
G. Farag, S. Zhao, T. Coratger, Pierre Boivin, G. Chiavassa, et al.. A pressure-based regularized lattice-Boltzmann method for the simulation of compressible flows. Physics of Fluids, American Institute of Physics, 2020, 32 (6), pp.066106. ⟨10.1063/5.0011839⟩. ⟨hal-02885427⟩
G. Farag, Pierre Boivin, P. Sagaut. Interaction of two-dimensional spots with a heat releasing/absorbing shock wave: linear interaction approximation results. Journal of Fluid Mechanics, Cambridge University Press (CUP), 2019, 871, pp.865-895. ⟨10.1017/jfm.2019.324⟩. ⟨hal-02142649⟩ Plus de détails...
The canonical interaction between a two-dimensional weak Gaussian disturbance (en-tropy spot, density spot, weak vortex) with an exothermic/endothermic planar shock wave is studied via the Linear Interaction Approximation. To this end, a unified framework based on an extended Kovasznay decomposition that simultaneously accounts for non-acoustic density disturbances along with a poloidal-toroidal splitting of the vorticity mode and for heat-release is proposed. An extended version of Chu's definition for the energy of disturbances in compressible flows encompassing multi-component mixtures of gases is also proposed. This new definition precludes spurious non-normal phenomena when computing the total energy of extended Kovasznay modes. Detailed results are provided for three cases, along with fully general expressions for mixed solutions that combine incoming vortical, entropy and density disturbances.
G. Farag, Pierre Boivin, P. Sagaut. Interaction of two-dimensional spots with a heat releasing/absorbing shock wave: linear interaction approximation results. Journal of Fluid Mechanics, Cambridge University Press (CUP), 2019, 871, pp.865-895. ⟨10.1017/jfm.2019.324⟩. ⟨hal-02142649⟩
Amaury Bannier, Éric Garnier, Pierre Sagaut. Riblet Flow Model Based on an Extended FIK Identity. Flow, Turbulence and Combustion, Springer Verlag (Germany), 2015, 95 (2-3), pp.351-376. ⟨10.1007/s10494-015-9624-2⟩. ⟨hal-01276488⟩ Plus de détails...
Large Eddy Simulations of zero-pressure-gradient turbulent boundary layers over riblets have been conducted. All along the controlled domain, riblets maintain a significant 11 % drag reduction with respect to the flat plate at the same R e τ (from 250 to 450). To compare the flows above riblets and a reference smooth wall, an appropriate vertical shift between the two surfaces is required. In the present study, the “vertical origin” is set using the identity of Fukagata, Iwamoto and Kasagi (FIK) in Phys. Fluids, vol. 14, 2002, L73. This identity, which provides a physically meaningful decomposition of the skin friction, has been extended to complex wall surfaces and constitutes the basis for the derivation of a new virtual origin. Using this FIK-based origin, it is shown that the complex interactions between the riblets and the near-wall turbulent structures can be taken into account by a simple shift of the two axes of the mean and turbulent velocity profiles. The appropriate upward shift Δu +, typical for drag reduction, is directly dependent on the skin friction on the riblets and on the reference smooth plate at the same R e τ .
Amaury Bannier, Éric Garnier, Pierre Sagaut. Riblet Flow Model Based on an Extended FIK Identity. Flow, Turbulence and Combustion, Springer Verlag (Germany), 2015, 95 (2-3), pp.351-376. ⟨10.1007/s10494-015-9624-2⟩. ⟨hal-01276488⟩
Richard Howard, Eric Serre. Large-eddy simulation in a mixing tee junction: High-order turbulent
statistics analysis. International Journal of Heat and Fluid Flow, Elsevier, 2015, 51, pp.65-77. ⟨hal-01138803⟩ Plus de détails...
This study analyses the mixing and thermal fluctuations induced in a mixing tee junction with circular cross-sections when cold water flowing in a pipe is joined by hot water from a branch pipe. This config- uration is representative of industrial piping systems in which temperature fluctuations in the fluid may cause thermal fatigue damage on the walls. Implicit large-eddy simulations (LES) are performed for equal inflow rates corresponding to a bulk Reynolds number Re= 39,080. Two different thermal boundary conditions are studied for the pipe walls; an insulating adiabatic boundary and a conducting steel wall boundary. The predicted flow structures show a satisfactory agreement with the literature. The velocity and thermal fields (including high-order statistics) are not affected by the heat transfer with the steel walls. However, predicted thermal fluctuations at the boundary are not the same between the flow and the solid, showing that solid thermal fluctuations cannot be predicted by the knowledge of the fluid thermal fluctuations alone. The analysis of high-order turbulent statistics provides a better understand- ing of the turbulence features. In particular, the budgets of the turbulent kinetic energy and temperature variance allows a comparative analysis of dissipation, production and transport terms. It is found that the turbulent transport term is an important term that acts to balance the production. We therefore use a priori tests to evaluate three different models for the triple correlation
Richard Howard, Eric Serre. Large-eddy simulation in a mixing tee junction: High-order turbulent
statistics analysis. International Journal of Heat and Fluid Flow, Elsevier, 2015, 51, pp.65-77. ⟨hal-01138803⟩
Journal: International Journal of Heat and Fluid Flow